TM9-2320-279-20-3
Filter-Separator Maintenance Instructions (Cont)
(14) Push 10 eyebolts (16) up in
brackets (22).
(15) Install 10 washers (23) and
nuts (24). Tighten to 7.5 lb-ft
(102 N•m).
Adhesives, solvents. and sealing
compounds can burn easily. can give
off harmful vapors, and are harmful
to skin and clothing. To avoid injury
or death, keep away from open fire
and use in well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or clothing,
wash immediately with soap and
water.
(16) Apply pipe thread sealing
compound to threads of plug (25)
and install in cover (21).
e. Installation.
(1) Install two coupling
gaskets (1 and 2) on two
pipes (3 and 4).
(2) Install three brackets (5) on
grating (6) with three
screws (7), brackets (8), and
locknuts (9).
(3) Soldier A guides
filter-separator (10) in
through top access opening
of pump module while
Soldier B operates suitable
lifting device.
23-19
