TM 9-2320-279-20-2
(6)
(7)
(8)
(9)
Winches, Cranes, and Power Takeoff (PTO) Maintenance Instructions (Cont)
Install spacer (10), insulator (11), and
switch (12) on remote controller
assembly (13) with two screws (14) and
lockwashers (15).
Connect connector (16) to switch (12).
Install insulator (17) and switch (18)
with two screws (19) and
lockwasher (20).
Connect connector (21) to switch (18).
e. Installation.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
17-124
Install preformed packing (1) and
clevis (2) in controller assembly (3) with
washer (4) and screw (5).
Install nut (6) on lever (7).
Install knob (8) on lever (7) and tighten
nut (6) against knob.
Install data plate (9) on cover (10) with
two screws (11).
Install gasket (12) and controller
assembly (3) on cover (10) with four
screws (13), lockwashers (14) and
nuts (15).
Install nut (16) and lockwasher (17) on
switch (18).
Install switch (18) on cover (10) with
nut (19).
