TM 9-2320-279-20-2
Winches, Cranes, and Power Takeoff (PTO) Maintenance Instructions (Cont)
17-24.1. HEAVY-DUTY WINCH REMOTE CONTROL UNIT REPAIR (M984E1).
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning/Inspection
f. Follow-on Maintenance
INITIAL SETUP
Models
References
M984E1
None
Test Equipment
Equipment Condition
None
TM or Para
Condition Description
Special Tools
TM 9-2320-279-10 Remote control unit removed
None
from stowage.
Supplies
Special Environmental Conditions
Solvent, dry cleaning, Item 47, Appendix C
None
Tags, identification, Item 48, Appendix C
General Safety Instructions
Personnel Required
None
MOS 63S, Heavy wheel vehicle mechanic
a. Removal.
(1) Loosen four screws (1), lift cover (2),
remove four washers (3), and screws
from cover.
NOTE
Tag and mark all wires and connectors
before removal.
(2) Remove two screws (4), washers (5), and
wires (6) from switch (7).
(3) Disconnect connector (8) from wiring
harness (9).
(4) Remove gasket (10).
17-120
