TM 9-2320-279-20-2
Winches, Cranes, and Power Takeoff (PTO) Maintenance Instructions (Cont)
17-24.1. HEAVY-DUTY WINCH REMOTE CONTROL UNIT REPAIR (M984E1) (CONT).
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
NOTE
Note position of switch.
Remove nut (11) and switch (7) from
cover (2).
Remove lockwasher (12) and nut (13)
from switch (7).
Remove four screws (14),
lockwashers (15), nuts (16), controller
assembly (17) from cover (2).
Remove gasket (18).
Remove two screws (19) and data
plate (20).
Turn nut (21) clockwise and remove
knob (22).
Remove nut (21) from lever (23).
Remove screw (24) and washer (25) from
clevis (26).
Remove clevis (26) and preformed
packing (27) from controller
assembly (17).
b. Disassembly.
NOTE
Tag and mark all connectors,
wires before removing.
(1)
(2)
(3)
(4)
switches, and
Disconnect connector (1) from
switch (2).
Remove two screws (3), lockwashers (4)
and insulator (5) from switch (2).
Disconnect connector (6) from
switch (7).
Remove two screws (8), lockwashers (9),
insulator (10), and spacer (11) from
switch (7).
17-121
