TM 9-2320-279-20-2
Steering System Maintenance Instructions
13-11. HYDRAULIC RESERVOIR STRAINERS REMOVAL/INSTALLATION.
This task covers:
a. Removal
b. Cleaning
INITIAL SETUP
Models
All except M984E1
Test Equipment
None
Special Tools
None
Supplies
Compound, sealing, pipe thread,
Item 18.2, Appendix C
Solvent, drycleaning, Item 47, Appendix C
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
c. Installation
d. Follow-on Maintenance
References
None
Equipment Condition
TM or Para
Condition Description
LO 9-2320-279-12 Hydraulic reservoir
drained.
Para 13-10
Hydraulic reservoir top
plate removed.
Special Environmental Conditions
None
General Safety Instructions
None
a .
Removal.
(1)
Remove two strainers (1) from threaded
pipes (2).
b.
Cleaning.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. lb avoid injury or death, keep
away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(1)
Clean hydraulic reservoir with
drycleaning solvent and clean rags.
WARNING
Compressed air used for cleaning purposes
will not exceed 30 psi (207 kPa). Use only
with effective chip guarding and personal
protective equipment, goggles, shield, and
gloves.
(2)
Dry hydraulic reservoir with
compressed air.
Change 2
13-39
