TM 9-2320-279-20-2
Steering System Maintenance Instructions
a.
Removal.
(1)
Remove two locknuts (1)
(2)
Remove hydraulic reservoir sight glass (2) and two preformed packings (3) from hydraulic
reservoir (4).
b. Installation.
(1)
Install two preformed packings (3) on hydraulic reservoir sight glass (2).
(2)
Install hydraulic reservoir sight glass (2) on hydraulic reservoir (4).
(3)
Install two locknuts (1) and tighten to 50 to 55 lb-in (5.6 to 6.2 N•m).
c.
Follow-on Maintenance.
(1)
Install hydraulic reservoir top plate (para 13-10).
(2)
Fill hydraulic reservoir (LO 9-2320-279-12).
(3)
Check hydraulic reservoir for leaks.
END OF TASK
13-10. HYDRAULIC RESERVOIR TOP PLATE AND GASKET
REMOVA/INSTALLATION.
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Models
All except M984E1
Test Equipment
None
SpeciaI Tools
None
Supplies
Compound, sealing, pipe thread,
Item 18.2, Appendix C
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Shut off engine.
LO 9-2320-279-12 Hydraulic reservoir
drained.
Special Environmental Conditions
None
General Safety Instructions
None
Change 2
13-35
