TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
11-46. FRONT SERVICE BRAKE CONTROL VALVE BOX REMOVAL/REPAIR/INSTALLATION
(M984E1) (CONT).
(3)
(4)
(5)
(6)
Tag, mark, and disconnect three hoses (5).
Cut off end of three hoses (5) behind bushings (6) and
remove nuts (7).
Remove three hoses (5) from box (3).
Remove four locknuts (8), screws (9), and box (3)
from fender (10).
b. Disassembly.
(1) Tag, mark, and remove two hoses (1 and 2) from
box (3).
(2) Slide boot (4) back and remove roll pin (5) from
knob (6).
(3) Remove knob (6) and boot (4) from valve (7).
(4) Remove nut (8) and valve (7) from box (3).
NOTE
Note position of elbows before removal.
(5) Remove three elbows (9, 10, and 11) and plug (12) from
valve (7).
11-192
