TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
11-45. TRAILER BRAKE HAND CONTROL VALVE REMOVAL/INSTALLATION (CONT).
b. Installation.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound gets on
skin or clothing, wash immediately with
soap and water.
(1)
(2)
(3)
(4)
(5)
Coat threads of connector (1) and two
elbows (2) with pipe thread sealing
compound.
Install connector (1) and two
elbows (2) in hand control valve (3).
Connect air lines (4 and 5) to valve (3).
Install hand control valve (3) in side
panel (6) with four screws (7) and
nuts (8).
Install side panel (6) on console (9)
with eight screws (10).
c. Follow-on Maintenance.
(1) Connect batteries (para 7-91).
(2) Start engine and build up air
pressure (TM 9-2320-279-10).
(3) Check for leaks (TM 9-2320-279-10).
(4) Shut off engine (TM 9-2320-279-10).
END OF TASK
(11-190
