TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
b. Installation.
WARNING
Adhesives, solvents, and sealing compounds can
burn easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in
well-ventilated area. If adhesive, solvent, or
sealing compound gets on skin or clothing, wash
immediately with soap and water.
(1)
(2)
(3)
(4)
(5)
Apply pipe thread sealing compound to
threads of fittings (1, 2, and 3).
Install fittings (1, 2, and 3) in valve (4).
Connect three air lines (5, 6, and 7) to
valve (4).
Install valve (4) in dashboard (8). Install
nut (9) and button (10) on valve.
Install roll pin (11) in button (10).
(6) Install light guard (12) with
four screws (13).
c. Follow-on Maintenance.
(1) Install instrument panel
(para 7-19).
(2) Connect batteries
(para 7-91).
(3) Start engine and allow air
pressure to build up
(TM 9-2320-279-10).
(4) Check connections for air
leaks.
(5) Check operation of trailer
air valve
(TM 9-2320-279-10).
(6) Shut off engine
(TM 9-2320-279-10).
END OF TASK
11-187
