TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
11-46. FRONT SERVICE BRAKE CONTROL VALVE BOX REMOVAL/REPAIR/INSTALLATION
( M 9 8 4 E 1 ) ( C O N T ) .
(13) Remove three grommets (26) from box (3).
(14) Remove four screws (27) and data plate (28) from
box (3).
c.
Cleaning/Inspection.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
(1) Wash all metal parts thoroughly in solvent.
(2) Inspect parts for damage. Replace if necessary.
d . A s s e m b l y.
(1) Install data plate (1) on box (2) with four screws (3).
(2) Install three grommets (4) in box (2).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can
give off harmful vapors, and are harmful to skin and clothing. To
avoid injury or death, keep away from open fire and use in
well-ventilated area. If adhesive, solvent, or sealing compound gets
on skin or clothing, wash immediately with soap and water.
(3) Coat threads of three elbows (5 and 6) with pipe thread sealing
compound and install on valve (7).
11-194
