TM 9-2320-279-20-2
Change 4
11-126.1
Brake and Air System Maintenance Instructions (Cont)
(5)
Remove three elbows (11) and nipple (12)
from cross fitting (13).
d. Assembly Model A.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
NOTE
Coat all pipe threads with pipe thread sealing compound.
(1)
Install two elbows (2) in tee (3).
(2)
Install nipple (4) in four-way tee (5).
(3)
Install reducer bushing (6), nipple (7),
and quick disconnect (8) in four-way
tee (5).
NOTE
Install check valve in same position as
noted prior to removal.
(4)
Install check valve (9) and two
elbows (10) in four-way tee (5).
