TM 9-2320-279-20-2
Change 4
11-127
Brake and Air System Maintenance Instructions (Cont)
f.
Installation.
NOTE
Some vehicles have nuts, lockwashers, and screws. Others have flanged nuts and screws.
(1)
Loosely install four clamps (1) on brackets (2) with four screws (3), lockwashers (4), and
nuts (5).
NOTE
Ensure air line from reservoir (7) is installed on outlet side of pressure protection valve on
reservoir (7.1).
(2)
Install four air lines (6).
(3)
Install reservoir (7) in clamps (1) with chain assembly (8), two screws (9), lockwashers (10), and
nuts (11).
(4)
Tighten four nuts (5) on top of clamps (1) and two nuts (11) on bottom of clamps.
g. Follow-on Maintenance.
(1)
Close drain valve (TM 9-2320-279-10).
(2)
Start engine (TM 9-2320-279-10).
(3)
Build up air pressure (TM 9-2320-279-10).
(4)
Check reservoir for leaks.
(5)
Shut off engine (TM 9-2320-279-10).
END OF TASK
