TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
11-30. AIR RESERVOIR NO. 2 REMOVAL/REPAIR/INSTALLATION (CONT).
(2)
Install six airhoses (6).
(3)
Install reservoir (7) with two clamps (8), eight washers (9), four screws (10), four
lockwashers (11), and four nuts (12).
NOTE
Install plastic cable ties, as needed, to secure airhoses.
e.
Follow-on Maintenance.
(1)
Close drain valve (TM 9-2320-279-10).
(2)
Start engine (TM 9-2320-279-10).
(3)
Build air pressure (TM 9-2320-279-10).
(4)
Check reservoir for leaks.
(5)
Shut off engine (TM 9-2320-279-10).
END OF TASK
11-122
Change 2
