TM 9-2320-279-20-2
11-124
Change 4
Brake and Air System Maintenance Instructions (Cont)
11-31. AIR RESERVOIR NO. 3 AND RIGHT SIDE TIRE INFLATION CONNECTOR
REMOVAL/REPAIR/INSTALLATION (CONT).
a. Removal.
NOTE
·
There are two fitting configurations on air reservoir No. 3.
·
Model A has tee fitting on inside port and four-way tee fitting on outside port.
·
Model B has cross fitting on inside port and tee fitting on outside port.
(1)
Remove two nuts (1), lockwashers (2), screws (3), and one chain assembly (4).
NOTE
Some vehicles have nuts, lockwashers, and screws. Others have flanged nuts and screws.
(2)
Remove four nuts (5), lockwashers (6), screws (7), and four clamps (8).
NOTE
Tag and mark air lines, valves, and fittings before removal.
(3)
Disconnect four air lines (9) and remove reservoir (10).
