TM 9-2320-279-20-2
11-120
Change 4
Brake and Air System Maintenance Instructions (Cont)
11-30. AIR RESERVOIR NO. 2 REMOVAL/REPAIR/INSTALLATION (CONT).
c. Assembly.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
NOTE
Coat all pipe threads with pipe thread sealing compound.
(1)
Install reducer bushing (2), check valve (3), and elbow (4) on
elbow (5).
(2)
Install reducer bushing (6), check
valve (8), and connector (9) on elbow (10).
NOTE
·
There are two models of vehicle
configuration when working on tee
and associated fittings. Model A has
two fittings and one elbow attached
to tee. Model B has three fittings
and one elbow attached to tee.
·
Perform step (3) for Model A.
·
Perform step (4) for Model B.
(3)
Install two connectors (11) and elbow
(12) on tee (13).
(4)
Install reducer adapter (14),
connector (11), connector (14.1),
and elbow (12) on tee (13).
