TM 9-2320-279-20-2
Change 4
11-115
Brake and Air System Maintenance Instructions (Cont)
d. Installation.
NOTE
·
It may be necessary to remove air line No. 613 from reservoir No. 3 to reservoir No.
1 and install first on reservoir No. 1.
·
Ensure air line No. 613 is installed from check valve on reservoir No. 3 to tee fitting
on reservoir No. 1.
(1)
Connect five air lines (1).
NOTE
Some vehicles have nuts, lockwashers, and screws. Others have flanged nuts and screws.
(2)
Loosely install four clamps (2) on brackets (3) with four screws (4), lockwashers (5), and
nuts (6).
(3)
Install reservoir (7) in clamps (2) with two screws (8), lockwashers (9), and nuts (10). Do not
tighten.
(4)
Tighten four nuts (6) on top of clamps (2) and two nuts (10) on bottom of clamps (2).
e. Follow-on Maintenance.
(1)
Close drain valve (TM 9-2320-279-10).
(2)
Start engine (TM 9-2320-279-10).
(3)
Build air pressure.
(4)
Check reservoir for leaks.
(5)
Shut off engine (TM 9-2320-279-10).
END OF TASK
