TM 5-5420-234-14&P
4-94. PROXIMITY SWITCH REPLACEMENT/ADJUSTMENT (HOOK ARM DOWN)
(continued).
b. Installation.
(1) Install rubber grommet (12), plastic insert (11) and nut (10) on proximity switch (15).
NOTE
Install cable ties as required.
Serrated side of nuts face bracket.
4
13
6
12 11 10
7
9
16
8
14
15
8
17
OTHER WIRE HARNESSES
REMOVEDFORCLARITY
1
MODEL A
(2) Install nut (17) on proximity switch (15).
2
(3) Install proximity switch (15) on frame (17) with nut (14)
(4) Route three wires (4, 6, and 8) up to junction box (13).
(5) Install three wires (4, 6, and 8), rubber grommet (12), plastic
3
insert (11) and nut (10) in junction box (13).
(6) Install brown wire no. 10 (8) on terminal no. 10 (9).
(7) Install black wire no. 11 (6) on terminal no. 11 (7).
(8) Install blue wire no. 12 (4) on terminal no. 12 (5).
(9) Close junction box cover (3) and tighten four screws (2).
18
(10) Close hydraulic cabinet cover (1).
NOTE
Perform step (11) for Model B only.
MODEL B
(11) Connect connector MC88 (18).
Change 1
