TM 5-5420-234-14&P
4-93. WORKLIGHT HARNESS REPLACEMENT (MODEL A ONLY) (continued).
(4) Remove nut (11), plastic insert (12), rubber grommet (13) and worklight harness (14) from main frame
junction box (6).
(5) Remove nut (11), plastic insert (12) and rubber grommet (13) from worklight harness (14).
b. Installation.
(1) Install nut (11), plastic insert (12) and rubber grommet (13) on worklight harness (14).
NOTE
Install cable ties as required.
6
4
5
10
7
8
(2) Install worklight harness (14) in main
frame junction box (6) with rubber
grommet (13), plastic insert (12) and nut
(11).
9
(3) Install wire no. 5 (9) on terminal no. 5
(10) and wire no. 7 (7) on terminal no. 7
(8).
(4) Install cover (5) on main frame junction
13
box (6) and tighten four screws (4).
12
(5) Connect two connectors (2) and (1) to
worklight (3).
11
c. Follow-on Maintenance:
14
Connect batteries (TM 9-2320-279-20).
OTHER WIRE HARNESSES
END OF TASK
REMOVED FOR CLARITY
4-663
Change 1
4-6 1
