TM 5-5420-234-14&P
4-95. PROXIMITY SWITCH REPLACEMENT/ADJUSTMENT (HOOK ARM UP)
(continued).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or compound gets on skin or
clothing, wash immediately with soap and water.
(2) Apply adhesive sealant to threads of two screws (14).
(3) Position proximity switch (18), with two clamp halves (17) as an assembly, on main frame (13) with plate
(16), two lockwashers (15) and screws (14).
17
NOTE
16
Install cable ties as required.
18
(4) Route three wires (4, 6, and 8) through
main frame (13) to main frame junction
14
box (3).
(5) Install rubber grommet (12), plastic
insert (11), and nut (10) on three wires
15
(4, 6, and 8).
14
(6) Install three wires (4), (6) and (8) in
main frame junction box (3) with
5
7
9
rubber grommet (12), plastic insert (11)
and nut (10).
NOTE
For Model B trucks, the black
wire connects to terminal no. 5,
the brown wire connects to
terminal no. 1, and the blue wire
connects to terminal no. 2
(7) Install blue wire no. 5 (8) on terminal
3
no. 5 (9).
12
(8) Install brown wire no. 4 (6) on terminal
11
no. 4 (7).
4
10
(9) Install black wire no. 3 (4) on terminal
no. 3 (5).
8
6
OTHER WIRE HARNESSES REMOVED FOR CLARITY
4--669
4 669
Change 1
