TM 5-5420-234-14&P
4-92. MAIN JUNCTION BOX HARNESS (REAR) REPLACEMENT (MODEL A ONLY)
(continued).
NOTE
Tag and mark wires prior to removal.
(3) Remove wire no. 29 (4) from terminal no. 29 (5), wire no. 2 (6) from terminal no. 2 (7), wire no. 12 (8)
from terminal no. 12 (9) and wire no. 14 (10) from terminal no. 14 (11).
(4) Remove wire no. 28 (12) from terminal no. 28 (13), wire no. 3 (14) from terminal no. 3 (15), wire no.
12 (16) from terminal no. 12 (9) and wire no. 2 (17) from terminal no. 2 (7).
NOTE
If additional access is required, 24-pin connector can be removed from main junction box.
(5) Remove connector P6 (18) from main junction box harness (19).
(6) Remove four locknuts (20), screws (21), and main junction box harness (19) from junction box (22).
Discard locknuts.
18
20
19
9
11
14
10
15
16
17
21
7
6
22
8
4
12
5
13
4--659
Change 1
4 657