TM 5-5420-234-14&P
4-83. MAIN FRAME VALVE (UNLOAD) HARNESS REPLACEMENT(MODEL A ONLY)
(continued).
b. Installation.
NOTE
Install cable ties as required.
Ensure rubber grommet in installed as noted during removal.
(1) Install rubber grommet (10), plastic insert (9), and nut (8) on main frame valve (unload) harness (12).
(2) Install new gasket (15) and connector (14) on directional control valve (16) and tighten screw (13).
11
5
7
4
10
6
9
8
12
16
15
(3) Position main frame (unload) harness (12)
in junction box (11).
14
(4) Install rubber grommet (10), plastic insert
(9), and nut (8) on junction box (11).
13
(5) Install black wire no. 20 (6) on terminal
no. 20 (7) and white wire no. 19 on
terminal no. 19 (5).
4-631
Change 1
4-631
