TM 5-5420-234-14&P
This task covers:
a.
Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Lockwasher (2) (Item 29, Appendix K)
Tool Kit, General Mechanic's: Automotive
Lockwasher (4) (Item 31, Appendix K)
(SC 5180-90-N26)
Equipment Condition:
Materials/Parts
Load removed from the BAP (para 2-12)
Cotter Pin (Item 17, Appendix K)
BAP unloaded from the CBT (para 2-10)
a. Removal.
(1) Release safety snap (1) from valve bracket (2) and lever (3).
(2) Remove cotter pin (4), straight pin (5), and lever (3) from valve bracket (2). Discard cotter pin.
(3) Remove two screws (6) and lockwashers (7) from valve bracket (2). Discard lockwashers.
(4) Remove two bolts (8) and lockwashers (9) from valve bracket (2). Discard lockwashers.
(5) Remove two bolts (10) and lockwashers (11), lanyard (12), valve bracket (2), and two nuts (13) from
control valve (14) and BAP frame (15). Discard lockwashers.
(6) Remove elbow (16) from tubing (17).
(7) Remove two adapters (18) from two tubings (19).
(8) Remove elbow (16) and two adapters (18) from control valve (14).
b. Installation.
(1) Install elbow (16) and two adapters (18) on control valve (14).
(2) Install two adapters (18) on two tubings (19).
(3) Install elbow (16) on tubing (17).
(4) Install two nuts (13), valve bracket (2), lanyard (12), and two bolts (10) and new lockwashers (11) on
control valve (14) and frame (15).
(5) Install two bolts (8) and new lockwashers (9) on valve bracket (2).
