TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenance Instructions (Cont)
10-12. DIFFERENTIAL CARRIER, AXLE NO. 4 (AXLE MODELS 480 AND 580) REPAIR
(CONT).
(6) Remove lockwire from two screws (7).
(7) Remove two screws (7) and adjuster
lock (8).
(8) Remove lockwire from two screws (9).
Matchmark center of bearing cap (10).
NOTE
Only Model 650 on M984E1 has two
bushings under bearing cap.
(9) Remove two screws (9), washers (11),
bearing cap (10), and two
bushings (12).
Ring gear must be tilted to clear
casting inside carrier.
(10)
(11)
(12)
(13)
(14)
Attach lifting device to ring
gear (1).
Soldier A removes ring gear (1) and
assembled parts from differential
carrier (13) while Soldier B
operates lifting device.
Place ring gear (1) on clean work
surface and remove lifting device.
Remove bearing adjusters (14
and 15) and bearing cups (16
and 17).
Soldier A and Soldier B place ring
gear (1), teeth up, on clean work
surface.
Matchmark differential case plain
differential case flanged half (19).
half (18) and
(15)
(16) Remove 12 screws (20) and differential case
plain half (18).
TA357113
10-64
