TM 9-2320-279-34-2
Axles No. 3 and No. 4 Maintenance Instructions (Cont)
10-11. DIFFERENTIAL CARRIER, AXLE NO. 4 REMOVAL/INSTALLATION (CONT).
c. Installation.
WARNING
Adhesives, solvents, and sealing compounds can
burn easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in
well-ventilated area. If adhesive, solvent, or
sealing compound gets on skin or clothing, wash
immediately with soap and water.
(1)
(2)
(3)
(4)
(5)
(6)
Attach lifting device to differential carrier (1).
Soldier A removes differential carrier (1) from
stand while Soldier B operates lifting device.
Apply silicone adhesive-sealant to housing
mounting surface.
Soldier A positions differential carrier(1) in
axle (2) while Soldier B operates lifting device.
Install bracket (3), 12 lockwashers (4), and
nuts (5).
Tighten nuts (5) to 220 to 240 lb-ft (298 to 325 N·m).
d. Follow-on Maintenance. None.
END OF TASK
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Models
Personnel Required
All
MOS 63W, Wheel vehicle repairer (2)
Test Equipment
References
Scale, spring, and attaching wire J8129
None
Indicator, dial J8001-3
Equipment Condition
Special Tools
None
TM or Para
Condition Description
Differential carrier, axle No.
Supplies
4, on clean work surface.
Compound, sealing, Item 28, Appendix C
pecial Environmental Conditions
Compound, sealing and thread locking,
None
Item 25, Appendix C
General Safety Instructions
Dye, prussian blue, Item 32, Appendix C
None
Lockwire, Item 39, Appendix C
Oil, lubricating, gear, Item 43, Appendix C
Level of Maintenance
Solvent, dry cleaning, Item 57, Appendix C
General Support
10-62
