TM 9-2320-279-34-2
(103)
(104)
(105)
(106)
(107)
Axles No. 3 and No. 4 Maintenance Instructions (Cont)
NOTE
l Do step (103) for axle Model 480 only.
• Tighten slotted nut until roll pin can be installed.
Install roll pin (60) through slotted nut (61) and pinion (37).
Lubricate and install bearing (62) on
side gear (63).
Install bushing (64) in end of output
shaft (65).
Apply lubricating oil to two preformed
packings (66) and install on output
shaft (65).
Install side gear (63) and assembled
parts on output shaft (65).
WARNING
Wear safety glasses while installing
retaining rings to protect eyes from
possible injury or blindness.
(108)
(109)
(110)
Install retaining ring (67) on end of
output shaft (65).
Install bearing cup (68) in differential
carrier (2).
Install output shaft (65) and assembled
parts in differential carrier (2).
10-59
