TM 9-2320-279-34-2
16-72
Change 4
PIN: 062144--004
Winch Maintenance Instructions (Cont)
16-18. FAIRLEAD/TENSIONER MOTOR REMOVAL/REPAIR/INSTALLATION
(M984E1) (CONT).
(10)
Install preformed packing (15) in cover bearing assembly (16).
(11)
Aline matchmarks and install cover (16) on IGR assembly (13) and body bearing assembly (5)
with eight washers (17) and screws (18).
(11.1) Tighten screws diagonally to 15 lb-ft (20.3 N•m). Turn shaft by hand several rotations. Increase
torque of each screw by 5 lb-ft (6.7 N•m) in diagonal pattern. Repeat procedure until torque of
each screw has reached 27 lb-ft (36.6 N•m).
(12)
Install preformed packing (19) and plug (20) in cover bearing assembly (16).
e. Installation.
(1)
Install two preformed packings (1) and fittings (2).
(2)
Install motor (3) on fairlead (4) with two screws (5), lockwashers (6), and washers (7).
(3)
Connect two hydraulic hoses (8).
f. Follow-on Maintenance.
(1)
Check operation (TM 9-2320-279-10).
(2)
Fairlead raised (TM 9-2320-279-10).
(3)
Check for leaks.
END OF TASK
