TM 9-2320-279-34-2
Change 4
16-69
Winch Maintenance Instructions (Cont)
Supplies
None
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning/Inspection
f. Follow-on Maintenance
INITIAL SETUP
Personnel Required
MOS 63W, Wheel vehicle repairer
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Fairlead lowered.
References
None
Special Tools
None
16-18. FAIRLEAD/TENSIONER MOTOR REMOVAL/REPAIR/INSTALLATION (M984E1).
Models
M984E1
Test Equipment
None
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
a. Removal.
NOTE
Tag and mark all lines.
(1)
Disconnect two hydraulic hoses (1).
(2)
Remove two fittings (2) and preformed packings (3).
(3)
Remove two screws (4), lockwashers (5), washers (6), and motor (7) from fairlead (8).
b. Disassembly.
(1)
Remove plug (1) and preformed
packing (2) from cover (3).
NOTE
Matchmark cover, ring, and motor.
(2)
Remove eight screws (4), washers (5),
cover bearing assembly (3), and
preformed packing (6) from IGR
assembly (7).
