TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
(7) Remove four screws (12), lockwashers (13), two clamp halves (14), connector assembly (15, and
preformed packing (16) from motor (4).
(8) Remove connector (17) and preformed pack (18) from elbow (19).
(9) Remove two connectors (20 and 21) from
fittings (22).
(10) Remove cap (23) and two fittings (22).
(11) Remove two elbows (24) and preformed
packings (25) from motor (4).
(12) Remove fitting (26) and preformed
packing (27).
(13) Remove plug (28) and preformed
packing (29).
b. Installation.
(1) Install preformed packing (1) and plug (2).
(2) Install preformed packing (3) and fitting (4).
(3) Install two preformed packings (5).
elbows (6), fittings (7) on motor (8).
(4) Install cap (9), connector (10), and
connector (11).
16-46.1
