TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
(45)
(46)
(47)
(48)
(49)
(50)
(51)
(52)
Install spacer (51), flat side out, on input shaft (23).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
Coat both sides of end cover with silicone adhesive-sealant.
Install end cover (41) on input shaft (23) making sure shifter (48) engages slot on drive hub (35)
Install 10 screws (52) and lockwashers (53).
Remove heavy-duty winch brake (para 16-16).
Drive input shaft (23) out to clear retaining ring groove.
Install retaining ring (54).
Coat both surfaces of gasket (55) with silicone adhesive-sealant and install.
Install cover (56) with four screws (57) and lockwashers (58).
16-37