TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
16-11. HEAVY-DUTY WINCH REPAIR (M984) (CONT).
(33)
(34)
(35)
(36)
Install two balls (38) and one spring (39).
Compress balls (38) and spring (39) with detent ball compressor screw.
Keeping bushing (36) and detent ball compression tool together, slide bushing over balls (38) and
spring (39).
Remove detent ball compressor screw and detent ball compression tool.
(37)
(38)
(39)
(40)
(41)
(42)
(43)
(44)
Press bearing (40) in end cover (41).
Install retaining ring (42).
Install bushing (36) and shifter shaft (37) in end cover (41). Do not push on shifter shaft.
Install oil seal (43) in shifter housing (44).
Install shifter housing (44) with two screws (45).
Install shifter T-handle (46) with roll pin (47).
Install shifter (48) and retaining ring (49).
Install pipe plug (50).
16-36
