TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
WARNING
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
Apply silicone adhesive-sealant to both mounting surfaces of ring gear (8) and install.
Install adapter cover (9) with 12 screws (10) and lockwashers (11).
Install plug (12).
Install air vent (13).
Install two retaining rings (14) in groove (15).
Install third retaining ring (16) on output
shaft (3) bet ween two grooves (15 and 17).
Push output shaft (3) in secondary
carrier housing (18) and install retaining
ring (19) in groove (20).
Pull output shaft (3) out and install
retaining ring (16) in groove (17).
(20) Soldier A installs sun gear (21) while Soldier B turns winch drum (22) with crowbar in winch
cable slot.
(21) Install secondary carrier housing (18).
(22) Install input shaft (23).
16-33
