TM 9-2320-279-34-2
Winch Maintenance Instructions (Cont)
d. Assembly.
(1) Install two bearings (1 and 2) in fairlead (3).
NOTE
Position wood block under fairlead.
(2)
(3)
(4)
(5)
Install pin (4) and shaft (5) in
sleeve (6).
Install key (7) in sheave (8).
Install sheave (8) with two washers (9
and 10), shaft (5), and sleeve (6).
Install plate (11) with four
lockwashers (12) and screws (13) on
fairlead (3).
e. Installation.
(1) Apply coating of grease to shaft
of fairlead (1).
(2) Install drum (2) on fairlead (1).
(3) Install plate (3) with four
lockwashers (4) and screws (5).
(4) Install grease fitting (6) in
drum (2).
16-24.13
