TM 9-2320-279-34-2
b.
Cab and Body Maintenance Instructions (Cont)
Installation.
(1) Installwrecker body side panels (TM 9-2320-354-10).
(2) Attach lifting device to four corner tiedowns (1).
Keep out from under heavy parts. Falling parts can cause
serious injury or death.
(3) Soldier A guides cargo body (2) while Soldier B operates
hoist to lift and position cargo body on vehicle.
NOTE
Steps (4) and (5) apply to both
front mounting brackets. Right
side is shown.
(4)
(5)
(6)
Soldier A installs two
screws (3), springs (4),
sleeves (5), and washers (6)
while Soldier B keeps two
nuts (7) from turning.
Tighten nuts (7) until
springs (4) are compressed to
3 7/8 in. (98 mm).
Repeat step (4) for front
bracket on left side of vehicle.
NOTE
Steps (7) and (8) apply to both
rear mounting brackets. Right
side is shown.
(7) Install two nuts (8), washers (9) and screws (10).
(8) Repeat step (7) for rear bracket on left side of vehicle.
c. Follow-on Maintenance.
(1) Install BII material (TM 9-2320-354-10).
(2) Install rear mud flaps (TM 9-2320-279-20).
(3) Install marker lights (TM 9-2320-279-20).
(4) Install reflectors (TM 9-2320-279-20).
END OF TASK
15-77
