TM 9-2320-279-34-2
Cab and Body Maintenance Instructions (Cont)
( 15-13. PUMP MODULE REMOVAL/INSTALLATION (M978) (CONT).
b. Installation.
WARNING
Do not get under module while supported
by lifting device. Module could fall causing
personal injury or death.
CAUTION
Module must be lowered slowly and
carefully into place while Soldier B makes
sure no wires, hoses, or linkages are caught
beneath module causing damage to module
parts.
(1) Attach suitable lifting device to pump
(2) Soldier A operates lifting device while
NOTE
Left and right side pump module mounting
brackets are installed the same way. Left
side is shown.
(3) Soldier A installs and holds plate (2) on
left chassis rail (3) under hard lift
point (4) and four screws (5) while
Soldier B installs nuts (6). Do not
tighten.
(4) Soldier A installs and holds two
screws (7) while Soldier B installs
plate (8) and two nuts (9).
(5)
(6)
module (1).
Soldier B guides pump module (1) onto vehicle.
(7)
Tighten nuts (6 and 9).
Remove lifting device from pump module (1).
Loosen four nuts (10).
15-60
