TM 9-2320-279-34-2
Cab and Body Maintenance Instructions (Cont)
15-13. PUMP MODULE REMOVAL/INSTALLATION (M978).
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Models
M978
Test Equipment
None
Special Tools
Insert-removal tool 114010
Supplies
Tags, identification, Item 60, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer (2)
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-20 2500 gallon tank drained.
TM 9-2320-279-10 Air system drained.
TM 9-2320-355-10 Rear access doors opened.
Equipment Condition (cont)
TM or Para
Condition Description
TM 9-2320-279-20 Pump module top door
removed.
TM 9-2320-279-20 Rear mud flaps/splash
guards removed.
TM 9-2320-279-20 Rear cable guide removed.
TM 9-2320-279-20 Batteries disconnected.
TM 9-2320-279-20 Hard lift point access
panel removed.
TM 9-2320-279-20 Hose cover removed.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
a.
Removal.
NOTE
Tag and mark all piping, tubes, and electrical conduit tubing before removal.
(1)
Remove nut (1) and hose (2) from tank level sensor (3).
(2)
Disconnect three connectors (4, 5, and 6).
(3)
Remove two nuts (7 and 8) and tubes (9 and 10) from elbows (11 and 12).
Change 2
15-55
