TM 9-2320-279-34-2
(6)
(7)
(8)
(9)
Frame Maintenance
Soldier A removes three nuts (18)
while Soldier B removes
screws (19).
Remove locknut (20) and
washer (21) from stud (22). Remove
stud .
Soldier A removes four nuts (23)
while Soldier B removes
screws (24).
Attach suitable lifting device to
rear crossmember (5).
NOTE
It may be necessary to spread frame
to remove rear crossmember.
(10) Soldier A and Soldier B remove rear
crossmember (5).
(11) Remove three nuts (25),
screws (26), and two
angles (27) from each side
of rear crossmember (5).
b. Installation.
(1) Install two angles (1), three
screws (2), and nuts (3) on
each side of rear
crossmember (4). Do not
tighten nuts.
Instructions (Cont)
13-76.3
