TM 9-2320-279-34-2
13-24. REAR CROSSMEMBER REMOVAL/INSTALLATION (M984E1) (CONT).
a. Removal
(1)
Remove two locknuts (1), clamps (2), and screws (3). Move wire harness (4) away from rear
crossmember (6).
(2)
Remove two nuts (6), lockwashers (7), and screws (8). Move emergency towing gladhand
bracket (9) aside.
NOTE
Not all models have star-shaped lockwashers. Star-shaped lockwashers are only
on screw closest to pintle.
(3) . Remove two nuts (10), lockwashers (11), lockwashers (11.1) and screws (12). Move service towing
gladhand bracket (13) aside.
NOTE
(4)
Do steps (4) through
Remove screw (14) and nut (15).
(9) on both sides of frame.
(5)
Soldier A removes three screws (16) while Soldier B removes nuts (17).
13-76.2
Change 2
