TM 9-2320-279-34-2
Frame Maintenance Instructions (Cont)
l
l
NOTE
Tag and mark wire harness and air lines.
Remove air line and electric wire clips and
brackets as required,
(7)
(9)
(9)
(10)
Pull wire harness (15) and air lines (16)
through two rear tandem crossmembers (17
and 18).
Remove two grommets (19) from
crossmembers (17 and 18).
Remove 24 screws (20) and nuts (21) from
crossmembers (17 and 18) and gussets (22).
hanger bracket (25).
Remove screw (23) and nut (24) on right side rear spring
CAUTION
Do not apply excessive force to
spread frame rails or frame could be
damaged.
(11) Use hydraulic jack (26) to spread
frame- rails (3 and 6).
(12) Slide right ends of
crossmembers (17 and
vehicle and remove.
18) to rear of
13-48
