TM 9-2320-279-34-2
Frame Maintenance Instructions (Cont)
a. Removal.
NOTE
Remove hoses and clamps as required.
(1) Remove eight locknuts (1) and screws (2) from bottom of crossmember (3).
(2) Remove eight locknuts (4) and screws (5) from top of crossmember (3).
(3) Soldier A removes six locknuts (6) and two upper gussets (7 and 8), while Soldier B removes four
screws (9).
(4) Soldier A and Soldier B remove crossmember (3).
(5) Soldier A removes five locknuts (10) and two lower gussets (11 and 12), while Soldier B removes
four screws (13).
b. Installation.
(1)
(2)
(3)
(4)
(5)
(6)
c. Follow-on Maintenance. None.
NOTE
Install hoses and clamps as required.
Soldier A installs two lower gussets (11 and 12) and five locknuts (10) while Soldier B installs
four screws (13).
Soldier A and Soldier B install crossmember (3).
Soldier A installs two upper gussets (7 and 8) and six locknuts (6), while Soldier B installs four
screws (9). Do not tighten locknuts.
Install eight screws (5) and locknuts (4) in top of crossmember (3).
Soldier A tightens six locknuts (6) while Soldier B holds screws (9).
Install eight screws (2) and locknuts (1) in bottom of crossmember (3).
END OF TASK
13-43
