TM 9-2320-279-34-2
Frame Maintenance Instructions (Cont)
13-15.1. FRONT INTERMEDIATE CROSSMEMBER REMOVAL/INSTALLATION (M984E1).
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Models
Equipment Condition
M984E1
Test Equipment
None
Special Tools
None
Supplies
Tags, identification, Item 60, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer
TM or Para
Condition Description
TM 9-2320-279-10
Equipment body removed.
TM 9-2320-279-10
Drain air from air reservoirs.
TM 9-2320-279-10 Batteries disconnected.
TM 9-2320-279-20
Vise, vise mount, and tube
support removed.
TM 9-2320-279-20 Self recovery winch
removed.
TM 9-2320-279-20
Transfer Case to No. 2 axle
propshaft removed.
Special Environmental Conditions
References
None
None
General Safety Instructions
None
Level of Maintenance
Direct Support
a. Removal.
NOTE
Remove hose and clamps as required.
(1) Remove two nuts (1), lockwashers (2), screws (3) and cushion clip (4).
(2) Move air manifold (5) away from crossmember (6).
13-42.1
