TM 9-2320-279-34-2
Frame Maintenance Instructions (Cont)
13-15.1. FRONT INTERMEDIATE CROSSMEMBER REMOVAL/INSTALLATION (M984E1)
(CONT).
c. Follow-on Maintenance.
(1) Install transfer case to No. 2 axle propshaft (TM 9-2320-279-20).
(2) Install self recovery winch (TM 9-2320-279-20).
(3) Install vise, vise mount and tube support (TM 9-2320-279-20).
(4) Install equipment body (TM 9-2320-279-10).
(5) Connect batteries (TM 9-2320-279-10).
(6) Start engine, build up air pressure, and check for air leaks (TM 9-2320-279-10).
END OF TASK
13-16. REAR INTERMEDIATE CROSSMEMBER REMOVAL/INSTALUTION (M977, M978,
M984, M985, M985E1).
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Models
M977, M978, M984, M985, and M985E1
References
None
Test Equipment
None
Special Tools
None
Supplies
None
Personnel Required
MOS 63W, Wheel vehicle repairer (2)
13-42.4
Equipment Condition
TMorPara
Condition Description
TM 9-2320-279-10
Shut off engine.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
