TM 9-2320-279-34-2
Frame Maintenance Instructions (Cont)
13.6 LIFT BRACKET ASSEMBLIES REMOVAL/INSTALLATION.
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
Equipment Condition
All
TM or Para
Condition Description
Test Equipment
TM 9-2320-279-10 Wheels and tires removed
None
from No. 2 axle.
Special Tools
TM 9-2320-279-10 Tire winch hoist arm and
None
extension removed.
TM 9-2320-279-20 Batteries disconnected.
Supplies
TM 9-2320-279-20 Splash guards removed.
None
TM 9-2320-279-20 Propeller shaft removed
from No. 1 and No. 2 axle.
Personnel Required
MOS 63W, Wheel vehicle repairer (2)
Special Environmental Conditions
None
References
None
General Safety Instructions
Do not work under vehicle unless vehicle is
supported with jackstands.
Level of Maintenance
Direct Support
a. Removal.
NOTE
Left and right lift bracket
assemblies are removed the
same way. Right side is
shown.
(1)
(2)
Remove two screws (1),
lockwashers (2), wedge
washers (3), spacers (4),
and tube brace (5).
Attach suitable lifting
device to lift bracket
assembly (6 or 7).
13-13
