TM 9-2320-279-34-2
Frame Maintenance Instructions (Cont)
13-4. RADIATOR SUPPORT REMOVAL/INSTALLATION (CONT).
c. Follow-on Maintenance.
(1) Install forward fender support screws (TM 9-2320-279-20).
(2) Install front crossmember (para 13-10).
(3) Install front torque rod (TM 9-2320-279-20).
(4) Install double check valve mounting plate (TM 9-2320-279-20).
(5) Install rear cab supports (TM 9-2320-279-20).
(6) Install front cab supports (TM 9-2320-279-20).
(7) Install towing eyes (para 13-2).
(8) Install No. 1 axle shock absorbers (TM 9-2320-279-20).
(9) Install main steering gear and bracket (para 12-5).
(10) Install radiator (TM 9-2320-279-20).
(11) Install fan (TM 9-2320-279-20).
(12) Install cab (para 15-2).
(13) Fill cooling system (TM 9-2320-279-20).
(14) Start engine and build normal air pressure (TM 9-2320-279-10).
(15) Check for leaks.
(16) Shut off engine (TM 9-2320-279-10),
END OF TASK
13-5. ENGINE SUPPORT REMOVAL/INSTALLATION.
I
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
Equipment Condition
All
TM or Para
Condition Description
Test Equipment
TM 9-2320-279-20 Batteries disconnected.
None
TM 9-2320-279-10 Spare tire removed.
Special Tools
TM 9-2320-279-10 Engine side panels removed.
TM 9-2320-279-20 Engine cover removed.
None
TM 9-2320-279-20 Splash guards removed.
supplies
TM 9-2320-279-20 Starter relay removed.
Ties, cable, plastic, Item 65, Appendix C
Para 12-6
Pitman arm removed.
Personnel Required
Special Environmental Conditions
MOS 63W, Wheel vehicle repairer (2)
None
References
General Safety Instructions
None
None
Level of Maintenance
Direct Support
13-8
