TM 9-2320-279-34-1
Axles No. 1 and No. 2 Maintenance lnstructions (Cont)
NOTE
Steps (9) and (10) are for left side only.
(9) Apply light coat of grease to threads of two
screws (14).
(10) Install end plate (15) and two screws (14) on lower
axle ball trunnion (13). Tighten screws to 40 lb-ft
(54 N·m).
NOTE
Install same number and thickness of shims as removed.
(11) Install shims (16), bottom cover (17), four
lockwashers (18), and screws (19).
(12) Tighten screws (19) to 185 lb-ft (251 N·m).
(13) Install grease fitting (20) in bottom cover (17).
(14) Lubricate lower bearing at grease fitting (20) with grease.
(15) Remove grease fitting (20).
(16) Install pipe plug (21).
(17) Apply grease to ball and bushing assembly (11) at rear of
ball socket (3).
9-89
