(14)
Steps
(15)
(16)
(17)
TM 9-2320-279-34-1
Axles No. 1 and No. 2 Maintenance Instructions (Cont)
NOTE
Step (14) is for left side only.
Remove two screws (24) and end plate (25).
NOTE
(15) through (21) are for both left and right sides.
Remove lower axle ball trunnion (26) by driving
lower axle ball trunnion upward into ball and bushing
assembly (27).
Remove two screws (28) and end plate (29) from upper
axle ball trunnion (30).
Remove upper axle ball trunnion (30) by driving upper
axle ball trunnion downward into ball and bushing
assembly (27).
9-85
