TM 9-2320-279-34-1
Axles No. 1 and No. 2 Maintenance Instructions (Cont)
9-12. DIFFERENTIAL CARRIER, AXLE NO. 2 REPAIR (CONT).
(56) Install two bushings (37) in differential carrier (17).
(57) Attach suitable lifting device to assembled
ring gear and differential (38).
(58) Lubricate bearing cones (1 and 3) with oil and
position bearing cup (39) on bearing cone (3).
NOTE
Ring gear must be tilted to clear casting inside
carrier.
(59) Soldier A installs assembled ring gear and
differential (38) into differential carrier (17)
while Soldier B operates lifting device.
CAUTION
Threads on bearing adjusters can be damaged if
bearing adjusters are not installed carefully.
(60) Install bearing cap (40) with two screws (41)
and washers (42). Tighten screws finger-tight.
(61) Install bearing cap (43) with two screws (44)
and washers (45). Tighten screws finger-tight.
(62) Install bearing adjusters (36 and 46)
finger-tight.
(63) Remove lifting device.
(64) Tighten four screws (41 and 44) to 40 to
50 lb-ft (54 to 68 N·m).
9 - 7 4
