TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
(11)
Install trimmer valve cover (33) and
eight screws (34) while pressing on
springs. Tighten screws to 8 to
12 lb-ft (11 to 16 N•m).
(12)
Install trimmer regulator valve (35), valve spring (36), and valve stop (37) in control valve
body (1).
(13)
Press valve stop (37) and install retaining pin (38) in control valve body (1).
(14)
Install three-four relay valve (39), valve spring (40), and valve stop (41).
(15)
Press valve stop (41) and install retaining pin (42) in control valve body (1).
Change 3
7-147
