TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
d.
Assembly.
(1)
Place control valve body (1) with flat
side up.
(2)
Install one-two relay valve (2),
spring (3), and spring spacer (4) in
bore of control valve body (1).
(3)
Press spring spacer (4) and install
retaining pin (5) in control valve
body (1).
(4)
Install two-three relay valve (6),
spring (7), and valve stop (8) in
control valve body (1).
(5)
Press valve stop (8) and install
retainer pin (9) in control valve
body (1).
Install
valves
(6)
(7)
NOTE
four clutch trimmer
with small end first.
Install fourth clutch
trimmer valve (10),
plug (11), spring (12)
spring (13), and valve
stop (14).
Install second clutch
trimmer valve (15),
plug (161, spring (17),
spring (18), and valve
stop (19) in control
valve body (1).
Change 3
7-145
