TM 9-2320-279-34-1
Transmission Maintenance Instructions (Cont)
7-13. GEAR UNIT AND MAIN SHAFT ASSEMBLY REMOVAL/REPAIR/
INSTALLATION (CONT).
l
(36.1) Lubricate thrust washer (26).
(37)
Install thrust washer (26) on center carrier assembly (4).
(38)
(39)
Install front carrier assembly (27) on center carrier assembly (4).
Install thrust washer (28) on front carrier assembly (27).
(40)
Install driven gear (29) in front carrier assembly (27).
e. Installation.
NOTE
External-tanged clutch plates (2) have two
thicknesses. Insure thicker external-tanged
clutch plate is next to piston. Thinner
external-tanged clutch plates should be
installed toward the rear of the transmission
housing.
(1)
Install 12 second clutch plates (1 and 2)
in transmission housing (3).
(2)
Install retaining ring (4).
7-88
Change 3