TM 9-2320-279-34-1
Electrical System Maintenance (Cont)
(18.1) Install Screw (52.1), two wires (52.2 and 52.3), lockwasher (52.4), and nut (52.5) on right side axle
stop (52.6).
(19)
Install three wires (53), two lockwashers (54), and nut (55).
(21)
Connect connector (61) to high idle control box (58).
(22)
Install grommets (62) on taillight and clearance light wires (56 and 57).
(23)
Push taillight and clearance light wires (56 and 57) through holes in rear fenders (59 and 60).
Install grommets (62) in holes.
(24)
Install two clamps (63) and screws (64).
(20)
Route chassis harness (1) and taillight and clearance light wires (56 and 57) up to high idle
control box (58) and rear fenders (59 and 60).
Change 3
6-122.11
